The first version of the hat according to the master class Natalia Grukhina from the site http://grukhina.ru
To crochet a Minnie Mouse baby hat, we need (for a head circumference of 52 cm):
- black yarn (Schachenmayr Bravo, 100% acrylic, 50 g = 133 m or Comfort YarnArt acrylic yarn) - approx. 40 gr.;
- some red and white yarn;
- hooks No. 4 and 3.5
Description of knitting:
Notation used:
vp - air loop
sc - single crochet
sc - double crochet
pssn - half-column with a crochet
ss - connecting post
Increase - 2 single crochet in one loop
Decrease - skip 1 column of the previous row, knit 1 sc;
Beanie:
1 row: ch 2, close in a ring, then knit in a circle 7 sc [= 7];
2nd row: Increase 7 [=14]
9 row: (Increase, 7 sbn) * 7 times [= 63]. We get a circle with a diameter of approx. 11 cm.
Next, we knit with increments through the row
10 row: 63 sb [= 63]
11 row: (Increase, 8 sc) * 7 times [= 70]
12 row: 70 sb [= 70]
13 row: (Increase, 9 sc) * 7 times [= 77]
14 row: 77 sb [= 77]
15 row: (Increase, 10 sc) * 7 times [= 84]
We get a circle with a diameter of 16.5 cm. This is the maximum diameter of the cap for a head circumference of 52 cm (see calculation below);
Next, we knit without increments to the required length of the cap.
16-35 rows (20 rows): 84 sc [= 84].
Next, we turn to knitting with white thread and crochet N 3.5:
36-38 rows (3 rows): 84 sc [= 84].
Then we break the thread and fasten the end.
Tip: For a different head circumference, use the formula below to calculate the maximum diameter:
Calculation of the maximum diameter of the cap: from the formula for the circumference C=2πR=πD, where C is the circumference, R is the radius, D is the diameter, π is the constant Pi(3.14), we have D=C/π, i.e. D=52/3.14=16.56 cm.
Ears:
1 row: ch 2, close them in a ring, then knit in a circle 7 sc [= 7];
2nd row: Increase 7 [=14]
3 row: (Increase, 1 sc) * 7 times [= 21]
4 row: (Increase, 2 sc) * 7 times [= 28]
5 row: (Increase, 3 sc) * 7 times [= 35]
6 row: (Increase, 4 sc) * 7 times [= 42]
7 row: (Increase, 5 sc) * 7 times [= 49]
8 row: (Increase, 6 sc) * 7 times [= 56]
For each ear, you need to tie 3 parts. Such a number of parts is necessary to stiffen the lugs, i.e. so that the ears hold and do not fall back or forward.
Next, you need to connect all 3 parts by knitting in a circle with single crochets. At the same time, leave the last 8-10 columns unconnected - this will be the place where the ears are attached to the cap.
Tip: Each of the three parts of the ear must be sewn to the cap separately, slightly spreading them apart by about 0.5-1 cm. Due to this spacer, the ear will keep straight and will not fall forward or backward.
Both ears are ready!
Bow:
1 row: a chain of 15 ch, 2 ch lifts, 14 dcs in the loops of the chain. Turn the knitting over and knit further with straight and reverse rows.
2-12 rows (11 rows): 15 pssn.
Next, we proceed to the formation of a recess on one side of the bow.
13 row: 2 ch lifts, skip 1 loop of the previous row, 13 dc
14 row: 14 pssn.
15 row: 2 ch lifts, skip 1 loop of the previous row, 12 dc
16 row: 13 pssn.
17 row: 2 ch lifts, skip 1 loop of the previous row, 11 dc
18 row: 12 pssn.
The next 2 rows are the center of the bow and a lace will pass through them, pulling the bow together: 19th row: 3 ch lifts, * (skip 1 loop of the previous row, 1 dc) *. Repeat sequence ** until the end of the row.
20 row: 3 ch lifts, * (skip 1 loop of the previous row, 1 dc) *. Repeat sequence ** until the end of the row.
Next, we knit with increments on the side of the bow where there were decreases in rows 13, 15 and 17. 21 row: 12 pssn.
22nd row: 2 ch lifts, 1 dc in the first loop, 11 dc
23 row: 13 pssn.
24th row: 2 ch lifts, 1 dc in the first loop, 12 dc
25 row: 14 pssn.
26 row: 2 ch lifts, 1 dc in the first loop, 13 dc
27-38 rows (12 rows): 15 pssn.
At this stage, we get the following detail:
Then repeat rows 13-26 again for the back surface of the bow and in the last row connect the blank for the bow into a ring, knitting the last row with connecting posts.
Tie the blank for the bow along the lower and upper edges with a "crustaceous step".
Then fold the resulting part, as shown in the photo below, aligning the holes of both surfaces of the bow:
Tie a chain of VP 20-25 cm long and thread it through the holes of the workpiece, as shown below:
Pull the ends of the lace and fix them:
Tie the central bow to make (rectangle):
To do this, cast on 6 ch and knit sbn in straight and reverse rows (6 sbn in each row) to a length sufficient to wrap the bow in the center, closing the tightening point.
Attach the resulting ribbon to the center of the bow, wrap it around the bow and sew the first and last rows of ribbon, placing the seam at the back of the bow.
Sew a bow to the hat.
Tip: So that the bow, as well as the ears, do not fall back or forward, I recommend sewing the bow in several places in the ears - this way the bow-ears design will be more stable.
Polka dots:
Minnie Mouse hat is ready!
Another master class from the site http://www.stranamam.ru/post/4941962/
The hat is based on this pattern.
So, let's begin. You will need these threads.
We knit the base of the cap with double crochets according to a pattern convenient for you with black threads of your size, add lilac for finishing, after stringing beads on the thread. We knit 6 rows with single crochets, arrange the beads as you like at the same distance from each other. For example, here the 2nd and 5th rows are connected with beads with a lilac thread. We leave a couple of cm until the end of the work for tying with a white thread, connect it.
1st row of strapping - 1 sc in every third loop of the previous row. Between RLS in 3 c. p. (see photo)
2nd row - in the first arch of three air loops we knit 6 columns with a crochet (CCH), in the second arch a connecting column, etc.
3rd row - we tie only CCH with a crustacean step, skipping the connecting posts (they do not need to be tied, otherwise the strapping will be false). (see photo)
After the hat is already tied, we knit the ears by unscrewing the strapping, as in the photo. The number of columns will be different for each. how to calculate resort to the help of Marina http://club.osinka.ru/topic-104072?&start=15 - read and knit. Strapping for 5 CCHs, between them RLS.
Now the ears and bow of our mouse. We resort to the description of Marina's mouse http://club.osinka.ru/search.php?topic=104072&q=%EC%E8%ED%E8%EC%E0%F3%F1 - read ... we knit our own. In this case, the ears are connected with dc in two strands each circle. Sew ready ears to the hat.
Our bow is like this. We are gaining a width of 15 in. p. and knit with a pattern as in the photo 30 rows in height (less as possible). Tie 6 CCH and connect. column. It is better to knit in two threads, it will be better to keep the shape. For a jumper, we take 4 in. n. wide and 12 rows of RLS in height, tie RLS. We sew firmly to the middle of the cap, as it is written in the link.
We make ties on the ears. our hat is ready!
And this is another version of a hat that can be knitted.
Ears and nose can be made from pom-poms, and a bow can be made from fabric or a wide satin ribbon.
And finally, a lot of ideas for inspiration - I suggest you admire the charming kids.
Mickey Mouse has been a favorite of adults and children for decades. Children's things are decorated with his image, a fountain pen and a photo frame can be decorated with a funny face, a Mickey Mouse toy is sewn with your own hands and knitted using the amihirumi technique, MK to create a variety of Mickey mice is one of the most popular on the Internet.
Funny and cute Mickey Mouse hat, knitted with a simple crochet, will definitely turn any kid into the center of everyone's amazement. Almost all children know the funny character Mickey Mouse from the cartoon. For many, he became the main character from the cartoon. Children often want to be like their favorite cartoon characters.
Master Class how to make a mickey mouse hat any beginner can do. The scheme of work is quite easy and simple. The mikimaus hat is crocheted in the round and without separation with special single crochet stitches. The knitted hat is decorated with huge round ears and a bright red bow with white polka dots. These are the distinguishing features of this product.
To make such a baby hat with a hook, we need:
- Black, white and red threads.
- Hook number 3.5.
- A special needle for sewing details.
Getting Started black thread. We crochet seven air loops and connect them into a ring. In the created hole we knit seven single crochet (RLS). After that, from the third row we begin to make increases, that is, we knit two columns in one loop. Increasing on the third circle we crochet through one column to the end of the row. In the fourth row, we knit an increase through two columns.
The schema remains the same. We also make increases to the ninth row. It turned out 63 loops, and the circle came out about 11 centimeters in diameter. Now we knit from the increase, alternating rows. In the tenth row we knit 63 columns, on the eleventh round we make an increase every eight columns. We knit a new row in the same way as the twelfth row.
We repeat this combination with the arrangement of rows until the 15th row, including himself. It turns out 84 loops, and a circle with a diameter of 16.5 cm. This is the largest diameter. It fits the size of a hat with a baby's head circumference of 52 cm. We continue to knit without an increase to the desired depth of the hat. Approximately twenty rows of crochet for 84 columns. Next, change the colored threads to white, and knit three more rows. We break the thread and fasten the end.
To calculate the diameter of the headgear, corresponding to a completely different value for the circumference of the baby's head, you need to use one excellent mathematical formula.
This is the calculation of the circumference C=2πR=πD, where C is the circumference, and R is the radius, D is the diameter, and π is a constant number (3.14). We substitute the necessary numbers, it turns out D \u003d C / π, that is, D \u003d 52 / 3.14 \u003d 16.56 cm. For a head circumference of 52 cm, you will need to tie the bottom of the cap with a size of 16.5 cm.
Such a headdress can be made for a child of any age and even for an adult, using this master class on creating a minnie hat with crochet and knitting needles. The next thing to do is two round lugs.
Master class on creating ears
Description of the work process:
We knit ears for a hat with black threads. We crochet seven air loops, connect them into a ring and knit seven single crochets there.
Next, under each loop, we make one addition, it will turn out fourteen pieces. Starting with a new row, in each subsequent row we make even increases. First, through one column, then after two, and so on, until you get eight rows, consisting of 56 columns.
Such details need to be connected in three pieces for each ear. This need arises because the lugs need rigidity. After all, they should hold well on a knitted hat and should not hang out. After that, we connect all three parts with each other with a single crochet in a circle.
Remember that the last eight or ten stitches are not needed. knit with each other. In this place we will sew the ears on the hat. It is necessary to attach the details as follows: we sew each of the three circles separately from each other and slightly push them apart, leaving a distance of 0.5-1 centimeter.
Thanks to this method of fastening, the ears will not hang out. In general, the hat will be stable and dense. This knitted hat is suitable for both boys and girls. This concludes our master class.
If you want to spice up your hat, you can also do small beautiful red bow, then your hat will completely turn into a Mickey Mouse headdress. The bow itself can be knitted in the same way, everything is not difficult at all, it is better to deal with its middle.
Master class on knitting the middle of the bow
Description of the work process:
- At the beginning of any knitting, do not forget to choose the right knitting needles! The center is made in the form of a rectangle. We knit with red yarn. The scheme is very easy. We crochet six air loops, knit RLS in forward and reverse directions back and forth. We continue the process until the length of the rectangle is prepared in order to wrap around the center of the bow, thereby covering the place where the lace is pulled together.
- Upon reaching a certain length of a rectangle we finish the row, fasten the thread and cut it off, leaving a large and long end for sewing the part to the central part of the bow. We wrap the knitted ribbon around the center, sew the first and last row with a needle, we will make the seam just behind the bow.
- Next, sew the finished bow to the hat. To avoid the bow falling on different sides, we attach it to the ears in several places at once.
Now the design will be quite solid and strong. Here we have done all the main work.
Even the smallest women love to flirt and want to be real beauties. That is why all girls love bright colors and unusual designs, even if it is a headdress. The Minnie Mouse hat crocheted looks interesting. It will be a great gift for a little girl who loves Disney mice. How to tie it with your own hands, consider in the article.
Necessary materials
What will you need to knit this wonderful hat?
- Black or gray yarn.
- Red or pink yarn.
- Beige yarn.
- White yarn.
- Hook.
- Threads in color for stitching details.
- Needle.
- Sintepon for stuffing parts (optional).
- Beads or buttons (optional to decorate the hat).
It is actually very easy to crochet a Minnie Mouse hat. The diagrams and description are so simple that even a novice needlewoman can handle them. The product is carried out without separation in a circle with ordinary columns. In addition to the hat itself, you need to tie large ears and a bright bow with white polka dots. They are the hallmarks of the charming Minnie Mouse.
For the summer version of the model, linen, silk or cotton yarn is suitable. Moreover, the knitting should be loose - double crochets. For a winter hat, it is recommended to take threads with the addition of wool. You can also knit the inside or sew on a warm lining. The canvas should be made dense, for this, single crochets are best suited.
There are a lot of patterns for knitting hats. Beginners can stop at the simplest posts. Experienced craftswomen will surely want to dwell on a more interesting crochet design of the Minnie Mouse hat. The photos in this article will demonstrate several patterns as an example. But you can choose any to your taste both for the cap itself and for other details.
Let's start knitting the hat itself. It will be, rather, a summer version, since the main product will be made with double crochets.
Minnie hat base
Cast on five loops on the hook. We close the knitted chain with a connecting column. The first row should be done with double crochets. Moreover, it is better to knit two loops into both walls. Thanks to this technique, the product will not curl. The next two rows are done in exactly the same way. At the beginning of each row, do not forget to make two air loops for lifting, and at the end - a connecting column. This will make the pattern not spiral, and the canvas will not be pulled together.
In the next rows, additions are made less often - after four or five loops. The older the girl, the larger the top of the hat should be. On average, in total, you need to knit seven to eight rows with double crochets. After that, the additions stop. Now in each loop you need to knit one double crochet. This will allow you to make the Minnie Mouse baby hat exactly in the shape of the child's head. So we knit rows until you reach the middle of the forehead of the baby.
Beanie edging
Now we cut the thread and attach the pink or red yarn. We proceed to the pattern itself, which resembles fans. From the hook we count the third loop, we knit four columns with a crochet into it. Repeat the steps until the end of the row. We fasten with a connecting column.
The second row is knitted in the same way. You just need to make sure that the columns are located between the lower elements ("fans"). The remaining rows must be knitted in the same way as the second row. The upper columns ("fans") should be strictly between the lower ones. Rows need to be knitted so that the edge of the cap reaches the level of the girl's eyebrows. This completes the knitting of the edging of the Minnie Mouse hat with a crochet hook.
Mouse ears
With this method of knitting, the ears will not turn out perfectly round, but they will be very similar to mouse ears. So, we collect five loops with black yarn and connect into a ring. Knitting will take place in a spiral with single crochets. In the first and second row, the additions must be done in each loop, then - less often, after three or four loops. So you need to knit until the circle in diameter is the size of a woman's palm.
Now the rows of single crochets need to be knitted in the usual way, without additions and subtractions. Due to this, the canvas will begin to curl. Fold the eyelet in half to determine the fold points. In these places, when knitting the next rows, you will need to do one decrease each. This is necessary in order for the part to acquire a rounded shape. Thus, we knit until a narrow hole remains. But it should not be too small, otherwise it will be inconvenient to sew to the base. In the same way, you need to tie another ear.
Another version of the ears
It will be easier for someone to knit ears according to the principle of a simple circle. Any scheme will work for this. A crochet Minnie Mouse hat will turn out just as well. For each ear, you need to tie two circles. That is, there will be four identical parts in total. It is better to knit with yarn in two additions so that the ears do not fall. For volume, you can put a little synthetic winterizer inside.
You need to connect the parts of the ear with single crochets in a circle, but not to the very end. This is done so that you can move the parts apart by about a centimeter and sew them to the cap separately. Due to this connection, the ears will not fall forward or backward, but will keep straight all the time.
Minnie's mouse face
If desired, you can tie not only the ears, but also the face of Minnie Mouse. It consists of several parts that are knitted separately. This is the beige part of the face, eyes and nose.
Let's start knitting from the base. We collect sixteen loops with beige yarn. We knit fifteen single crochets along the chain. In the last loop - three columns. On the other side of the chain, we also knit fifteen columns. Now we turn the product and in the same way we make six more rows. In places of bending, you need to knit three columns in one loop. You may need to decrease or increase the number of rows, so periodically try on the part for the Minnie Mouse hat. Crochet the edges when the base is finished.
Mouse eyes and nose
Now let's move on to the eyes. With white yarn, cast on six loops on the hook. Knit a row of double crochets along the chain. In the extreme loops you need to make an increase of five columns. The second row is knitted in the same way. Only in each loop there should be two columns. The pupils are made in the same way with a black thread, but smaller in size.
The nose is a regular ball. You can tie a bead of a suitable size. But making it from scratch is very easy. In order not to form an ugly seam, it is better to knit in a spiral. In the first three rows there should be an addition. These are six columns that need to be distributed evenly. The fourth and fifth rows remain without additions. Further, subtractions are made - this is minus six columns. It remains to fill the ball of synthetic winterizer and pull the thread.
In principle, for a Minnie Mouse nursery, it is enough to tie one eye to make it look original and unusual. The base and nose do not have to be done.
Bow for Minnie
Cast on about ten loops on the hook and three more to lift. Knit a row with double crochets. This will be the width of the bow. Next, you need to knit such a number of rows that you are satisfied with the length of the ribbon. Sew the ends together and turn inside out. The jumper for the bow is knitted in the same way, only smaller. We place it in the middle of the ribbon and now sew its ends together.
The finished bow does not have to be sewn to a crocheted Minnie Mouse hat. You can make it removable on a pin. This will allow you to further adjust the size of the cap, if you pin the bow from above, capturing part of the crown.
Bow mugs
White peas on a bright bow are a hallmark of Minnie, so they must be. With light yarn, we collect four loops on the hook and close in a ringlet. We knit seven columns with a crochet and fasten the thread. One row will be enough. Such circles need to be connected from six to eight pieces. You can also decorate the red (pink) edging of the hat with them. Then the peas will need twice as much.
White knitted circles can be easily replaced with buttons, beads, small pom-poms, sequins or large rhinestones.
Stitching parts
In principle, this is the whole crochet Minnie Mouse hat master class. It remains only to collect all the parts into one whole. If you knitted a face, then first we collect it. Sew the pupils to the white part of the eyes. We combine it with beige details for the face. We attach a nose to it. Eyelashes can be made with threads so that the eyes are more expressive, and the mouth. The resulting face is sewn onto the hat above the edging.
Now sew on the ears. Fold the hat in half to mark the fold. We pin ears to it with pins. You can attach them with connecting posts or sew with a needle.
Sew white circles to the bow. We fasten it on the top of the cap in the middle. The bow can be sewn with ears to keep them better. That's all, a wonderful headdress for a girl is ready.
Now you know how to crochet a Minnie Mouse hat. It will be a great gift for a little fashionista for any occasion. If you remove the bright edging, the bow, and make the ears bigger, you get a great hat for a boy, stylized as Mickey Mouse.
Disney cartoons have been beloved by children and adults for decades. Children love to play with toys and wear things that look like their favorite characters. Do not deny them this pleasure? knit a hat with the image of a Mickey Mouse mouse with your own hands, give joy to a child. For boys, you can knit a hat with Mickey, but for girls? with his girlfriend Minnie Mouse. Then it would be appropriate to knit a boy's version from a combination of red ears and a black base, and for a girl, a pink model with a cute bow on top is suitable. In addition, the product can be supplemented with ties if it is intended for babies, so that the baby cannot take it off on the street on his own. You can see a photo of a bright sample below.
Lots of craft options. Can you combine business with pleasure? review the cartoon with the family in order to refresh the image of the character in memory, and embody all your associations in a knitted headdress.
We knit the main part of the Mickey Mouse hat with our own hands
To get started on making this cute baby boy hat, you'll need the following supplies:
- 40 grams of acrylic black yarn;
- remnants of red and white yarn;
- hook No. 3.5 and No. 4.
The diagram below is designed for size 52, that is, the child's age is 3-4 years. If you need to knit a hat on a different head circumference, then you need to use the simple formula for calculating the maximum diameter C=2?R=?D, where C? circumference, R? radius, D? diameter, ? ? 3.14.
Let's start a set of loops:
1 row? we knit 2 air loops, we close them in a ring, then we knit 7 columns without a crochet in a circle.
2 row? we make 7 additions.
3 row? make an addition, then knit 1 single crochet and repeat the process 7 times.
4 row? you should start by adding, then 2 single crochet, repeat 7 times.
5 row? do 3 additions, 3 single crochet and repeat 7 times.
6 row? the increase is followed by 4 single crochet, repeat 7 times.
7 row? we knit an addition, 5 columns without a crochet and repeat the step 7 times.
8 row? for the addition, we knit 6 single crochets, repeat the pattern 7 times.
9 row? we knit an increase, then 7 columns without a crochet and reproduce the row 7 more times. The result should be a circle with a diameter of 11 cm.
In subsequent rows, increases are made every other time.
10 row? we knit 63 columns without a crochet.
11 row? addition, 8 single crochet * 7 times
12 row? we just knit 70 single crochets.
13 row? we make an increase, 9 single crochet * 7 times.
14 row? consists of 77 single crochets.
15 row? we make an increase, 10 single crochet * 7 times. We get a circle with a diameter of 16.5 cm. This is the maximum diameter for size 52, you may have a different value, you need to knit up to it. Further, the knitting process is not accompanied by additions, we knit with ordinary loops to the desired length of the headdress.
16-35 rows? we knit 84 single crochets.
We knit the edge with a crochet No. 3.5 with light threads:
36-38 rows? we knit 84 single crochets. The knitting process is completed, cut off the end and hide it inside.
How to tie mouse ears correctly, quickly and efficiently?
We continue the master class, and the next step is knitting the ears, which then need to be sewn to the top of the finished product. To make them properly "stand" and be quite thick, tie 6 ears, and then combine them into 2 ears of the future Mickey Mouse. The description of the process is as simple as possible, anyone can handle knitting the ears:
We take the rest of the black yarn and start a set of loops.
1 row? we make 2 air loops, close them in a ring, and then we knit 7 single crochets in a circle.
2 row? we make 7 additions.
3 row? increase, 1 single crochet * 7 times.
4 row? we knit an addition, 2 columns without a crochet, repeat 7 times.
5 row? Increase, 3 single crochet * 7 times.
6 row? we knit another addition, 4 single crochet * 7 times.
7 row? we make an addition, then 5 single crochets and repeat this row 7 times.
8 row? in the last row we knit an addition, 6 columns without a crochet and repeat everything 7 times.
Perhaps the knitting process will be faster with knitting needles, but the advantage of crocheting is that you do not have to make a seam on the hat itself. Ears are ready. It remains to sew them together and sew to the crown of the cap. For a girly hat, you can add a bow.
But since we have a male model, we leave everything as it is. Get a strict classic Mickey Mouse.
Video tutorials on the topic of the article
Videos on the topic of the master class will help you draw inspiration for your work. Knitting a hat with the image of a funny Mickey Mouse is not as difficult as it might seem from the diagrams. Happy viewing!
Yarn: "Brilliant" from Vita. 45% wool, 55% acrylic, 380 m / 100 g. Yarn consumption: pink 20 g, dark gray 30 g. Tools: hook No. 2.5 Knitting density: Pg = 2.31 loops in 1 cm. Pv \u003d 1.47 rows in 1 cm. Cap size: 44 - 46
We bring to your attention a master class on crocheting a funny Minnie Mouse hat for a little girl. Minnie Mouse is a popular Disney cartoon character, Mickey Mouse's girlfriend. Known for her love of outfits and a bright pink big bow.
Model description
Hat for girls Minnie Mouse crocheted. Used yarn in bright contrasting colors: dark gray and hot pink. The shape of the hat "on the head". The child's ears are protected by earmuffs. Twisted cord ties. Finishing - decorative round ears and a large knitted bow.
Calculation of loops for knitting hats Minnie Mouse
- head girth (Ogol) - 45 cm;
- distance from the crown to the earlobe (Vsh) - 16 cm.
Determine the number of loops (columns) according to the width of the cap. To the girth of the head, add 1 cm to freedom, because. - knitting is slightly stretched and we multiply the obtained value by the density of knitting horizontally. We get: (45 + 1) x 2.31 = 106 .
First, we will knit the bottom in a circle, making additions in accordance with. When knitting with semi-columns with a crochet, you need to knit 8 columns (including 3 lifting loops).
Determine the number of rows to be knitted for the bottom: 106: 8 = 13 full rows, inc 2 more sts evenly on row 14. Where 106 is the number of loops (columns) to be knitted, 8 is the number of columns that we knit in the initial ring and which will be added from row to row according to the circle rule.
In order for the hat to sit better on the head, we will knit rows without additions between the last two rows of the bottom. So the transition to the crown will be smoother.
The height of the hat is equal to the measure from the top of the head to the earlobe, we have 16 cm.
Working process
The main part of the hat
We knit a hat from top to bottom, starting from the bottom. Knitting in a circle, without turning the work. In brackets is the number of columns in a row, including lifting loops. In order to prevent the places of increments from shifting, at the beginning of the row we knit a half-column with a crochet in the same loop as the lifting air loops. We mark the lifting air loops in each row with a marker (in the photo - a piece of yarn of a different color).
- 1 row: 8 half double crochets in the initial ring, including 3;
- 2 row: - repeat 8 times, (16)
- 3 row: - repeat 8 times the connecting column (24)
- 4 row: - repeat 8 times the connecting column (32)
- 5 row: - repeat 8 times the connecting column (40)
- 6 row: - repeat 8 times the connecting column (48)
- 7 row: - repeat 8 times the connecting column (56)
- 8 row: - repeat 8 times connecting column (64)
- 9 row: - repeat 8 times connecting post (72)
- 10 row: - repeat 8 times the connecting column (80)
- 11 row: - repeat 8 times connecting column (88)
- 12 row: - repeat 8 times connecting column (96)
- 13 row: we knit without additions, in each loop 1 half-column with a crochet, we close the row with a connecting column (96)
- 14 row: - repeat 8 times the connecting post (104)
- 15 row: we knit without additions, in each loop 1 half-column with a crochet, we close the row with a connecting column (104)
- 16 row: [2 double crochets in one loop, 51 stitches] - repeat 2 times (106)
Having connected the bottom, you need to measure its radius and determine how much more you need to knit with a tulle. The tulle is knitted without additions. So that the junction of the loops does not move, we will use the swing principle: at the beginning of one row we knit a half-column with a crochet into the same loop as the lifting air loops (as in the photo above). At the beginning of the next row, we knit a half-column with a crochet from the next loop.
Tula 10 rows from 17 to 26 inclusive. Pink stripe about 4 cm (7 rows) from the 20th to the 26th row. We do not break the pink thread, we will tie a hat with it.
If you want the finished product to have a beautiful shape, the hat needs to be molded. To do this, wet the product, wring it out slightly and put it on a mannequin (blank). Let dry well. As a mannequin at home, it is convenient to use an ordinary balloon. It is easy to inflate to the desired size.
Headphones
The number of columns (106) is divided into 5 parts. It turns out one part of 21 columns and 1 in the remainder. Loops are distributed as follows: before - 2 parts; back of the head and each ear - 1 part. Attach the loop in the remainder of the back. We get:
- back - 22 columns;
- ears - 21 for each;
- before - 42 columns.
We distribute the loops so that the connection line of the rows is behind the hat.
We knit headphones as a continuation of the cap with gray yarn.
- 1st and 2nd row: 1 air lifting loop, 20 half-columns with a crochet;
- 3 row: 1 air lifting loop, skip 1 loop, 18 half-columns with a crochet;
- 4 row: 1 air lift loop, 18 double crochets;
- 5 row: 1 air lifting loop, skip 1 loop, 16 half-columns with a crochet;
- 6 row: 1 air lift loop, skip 1 loop, 14 half-columns with a crochet;
- 7 row: 1 air lifting loop, skip 1 loop, 12 half-columns with a crochet;
- 8 row: 1 air lifting loop, skip 1 loop, 10 half-columns with a crochet;
- 9 row: 1 air lifting loop, skip 1 loop, 8 half-columns with a crochet;
- 10 row: 1 air lift loop, skip 1 loop, 6 half-columns with a crochet;
- 11 row : 1 chain lift, 1 loop skip, 3 half double crochet, connecting column.
With pink yarn we will tie a hat along the bottom and again with connecting posts.
decorative lugs
For decorative mouse ears, you need to knit 4 identical circles. The principle of knitting is the same as that of the bottom. You can knit the ears in the size you need. We have a circle radius of about 3 cm (5 rows). As a result of the additions, 40 loops were obtained.
Cut out the padding from the padding polyester with a diameter slightly smaller than the ear piece. We add two parts by putting a synthetic winterizer in them and tie them with single crochets. In order to attach the ear to the hat, we do not connect the parts to the end: we leave ¼ of the loops free, we have 10 loops. We will leave the free end of the thread longer (about 55 cm), with which we will attach the eyelet to the cap.
We attach the finished ears to the cap with a hook, connecting posts. We move the unsewn sides apart, it turns out a “leg” for which we attach the ear. In order to mark the place for attaching the ears, fold the cap in half, combining the middle of the front and back. Lay the thread along the fold line through the top of the head. Focusing on it, pin the ear with pins at a distance of 4 cm from the top of the head.
knitted bow
We knit a bow with half-columns with a crochet in the form of a rectangle measuring 13 x 6 cm and tie it along the contour with connecting posts. We attach a bow in the middle to the hat and in the upper part to the ears. The hat is ready!
